Инструкции Пользователя для Weider POWER PAK WEMC0647

Thank you for selecting the WEIDER

®

resistance sys-

tem MAX PACK accessories. The MAX PACK is
designed to increase the amount of resistance avail-
able on the PLATINUM PLUS BY WEIDER resistance
system. 

For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If

you have questions after reading this manual, see the
front cover of this manual. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WEMC0674.0. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.

1.

Remove the Side Mech Cover (A) from the Mech
Covers (B, C). 

2.  Remove the Cover Plate (D) from the Side Mech

Cover (A).

3.

Locate the Sensor Wire (E) (see the inset draw-
ing). Connect the Sensor Wire to the Sensor
Plate (11). 

into the socket and snap into place. If the con-
nector does not slide easily and snap into place,
turn the connector over and then insert it.

Snap the Sensor Plate (11) into the Side Mech
Cover (A).

4.

Replace the Side Mech Cover (A) onto the Mech
Covers (B, C) (see drawing 1).

5.

B

1

2

3

C

A

D

E

A

A

11

E