Справочник Пользователя для Oregon Scientific BPW810N

Скачать
Страница из 5
activities may alter your reading.
• 
Wait at least an hour before taking your blood pressure 
if you have just eaten a large meal.
• 
Do not smoke or drink alcohol before taking your blood 
pressure.
• 
Do not measure your blood pressure if you are under stress.
• 
Wait at least 3 minutes between measurements. This 
allows your blood circulation to recover.
• 
For  a  meaningful  comparison,  try  to  measure  under 
similar conditions. For example, take daily measurements 
at approximately the same time, on the same wrist, or as 
directed by a physician.
• 
To stop the measurement process at any time, press  .
• 
The  unit  automatically  switches  off  1  minute  after 
taking a measurement. To save the battery life, press
taking
 as soon as you are fi nished to turn off the unit.
To take a measurement:
1.   Choose  the  position  from  which  you  wish  to 
measure - sitting or lying down.
2.   Position your body so that your wrist is parallel with your 
heart, using the chart and illustrations below as a guide.
3. Relax your hand and press      to turn on the unit. A voice 
will prompt you to sit in the correct position.  Press    
again.  Voice will remind you to relax and remain still. 
Wrist cuff will begin inflating automatically to measure 
blood pressure.
  NOTE 
  This  unit  can  intelligently  adjust  the  cuff  pressure
 
and  infl ate  to  a  higher-pressure  level  (>180  mmHg)  when
 
needed.
Your systolic and diastolic pressure readings fl ash on the 
LCD,  followed  by  MAP  and  pulse  per  minute  readings 
every  2  seconds.  At  the  same  time,  your  measurement 
results  and  the  blood  pressure  classifi cation  will  also  be 
announced.
4.   To  repeat  the  announcement,  simply  press  TALK  /
VOLUME.
5.   If you want to save the record to memory, press 
 or 
 or
 and the results will be saved to User 1’s or User 2’s 
 
memory accordingly.
The measurement is stored as the fi rst (MEM 1) entry in 
the user record you selected; the last entry (MEM 30) is 
dropped,  and  all  the  entries  in  between  move  up  1  digit 
(e.g. 28 becomes 29, and so on).
Sitting 
down 
with no 
armrest
Place  your  arm  across  your  chest  with 
the  wrist  parallel  to  your  heart.  Hold  your 
elbow with the other hand.
Position your wrist on a support, cushion, 
or your thigh so that it is parallel to your 
heart with the palm facing up.
Lying 
down
IF YOU 
ARE...
S i t t i n g 
d o w n 
with  an 
armrest
Place your elbow on a table, using an object 
as a support under your forearm. Your wrist 
should be parallel to your heart, with the 
palm facing up.
THEN...
RECALLING MEASUREMENTS STORED IN MEMORY
To view a history of User 1’s records, press 
.
To view a history of User 2’s records, press 
.
 NOTE 
• 
The  most  recent  record  (1)  is  shown  fi rst.  Each  new 
measurement  is  assigned  to  the  fi rst  (1)  record.  All  other 
records are pushed back one digit (e.g., 2 becomes 3, and 
so on), and the last record (30) is dropped from the list.
• 
Press the corresponding user button again ( 
 or 
 or
 ) 
 )
to see additional records.
• 
Press  and  hold  the  corresponding  user  button  to  auto-
advance to additional records.
• 
The date and  time  of  measurements taken
 
are
 
shown
 
with each record.
• 
Memory  records  will  be  kept  even  when  the  batteries 
become exhausted and are replaced.
DELETING A MEASUREMENT RECORD FROM MEMORY
You have the option of deleting your latest measurement 
record  or  entire  measurement  history.  This  is  useful  if 
measurements  have  not  been  accurately  recorded  and 
need to be recorded again.
Problem Symptom
No
power
Display is
dim or will
not light up
Batteries are
exhausted
Replace with
new batteries
Batteries are
inserted
incorrectly
Insert the
batteries
correctly
Low
batteries
 shows
on the
display
Batteries
Replace
with new
batteries
TROUBLESHOOTING
This section includes a list of error messages and frequently 
asked questions for problems you may encounter with your 
blood pressure monitor. If the product is not operating as you 
think it should, check here before arranging for servicing.
Dimensions:
Height x Width x Depth                
3.5 x 3.4 x 1.2 inches
                                                      
(90 x 86 x 30.8 mm)
Weight                                           
6.3 oz (180g) without batteries
Cuff circumference                       
5.3 to 7.7 inches (13.5
                                                   to 19.5 cm)
Measuring range:
Pressure                                    30 to 280 mmHg
                                                   (4.0 to 37.3 kPa)
Pulse                                          40 to 200 pulse/min
Accuracy:
Pressure                                    +/- 3 mmHg (+/- 0.4 kPa)
Pulse                                          +/- 5%
Power:
Power supply                            3V DC, 2 LR03 / AAA /
                                                   UM4-size 1.5V batteries
Power save                               Auto power off after 1
                                                   minute of non-activity
Operating environment:
Operation                                   50°F to 104°F (10°C to 40°C)
Storage / Transport                   -4°F to 140°F (-20°C to 60°C)
Humidity range                          10% to 83% relative humidity
BLOOD PRESSURE LOG BOOK
To create a log of your blood pressure history, complete the 
personal information section at the top, then enter the details 
(date, time, and measurements) for each reading you take. 
To  plot  your  history,  use  an  S  (systolic),  D  (diastolic)  and 
M  (mean  arterial  pressure)  to  mark  the  points  where  each 
measurement  falls  on  the  chart,  then  connect  the  points  to 
view your history over time. 
Name:                    Age:                    Weight:              (kg/lbs)
Name:                    Age:                    Weight:              (kg/lbs
Name:                    Age:                    Weight:              (kg/lbs
Name:                    Age:                    Weight:              (kg/lbs
© 2009 Oregon Scientifi c. All rights reserved.
P/N.:300100682-00012-10 
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientifi c.com
www.oregonscientifi c.com) to learn more 
about Oregon Scientifi c products. 
If you’re in the US and would like to contact our Customer 
Care department directly, please visit: 
www2.oregonscientifi c.com/service/support.asp 
www2.oregonscientifi c.com/service/support.asp 
For international inquiries, please visit: 
www2.oregonscientifi c.com/about/international.asp
www2.oregonscientifi c.com/about/international.asp.
EU-DECLARATION OF CONFORMITY
Protected by US. Patent no. 7,211,047
Check This
Remedy
Hereby, Oregon Scientific, declares that this Talking Blood 
Pressure Monitor(Model: BPW810N) is in compliance with 
EMC directive 2004/108/EC. A copy of the signed and 
dated Declaration of Conformity is available on request 
via our Oregon Scientific Customer Service.
 NOTE Once the pressure reaches a certain level, it will 
slowly deflate until the measurement results are displayed 
on the LCD.
DELETING A SINGLE RECORD
DELETING ALL RECORDS
1.  Press       or       to recall the latest measurement 
 
record for User 1 or User 2.
2.  Press and hold SET until the LCD shows “dEL OnE”.
2.  Press and hold SET until the LCD shows “dEL OnE”.
3. Press 
SET.  First record will be displayed on LCD 
       screen.
3.  Press       to select option to delete all records 
       (“dEL ALL”).
4.  Press and hold SET for 2 seconds to delete all 
       measurement records. After you have confirmed 
       deleting all records, the screen shows “dEL dOnE”.
4.  Press respective user button (      /      ) to scroll 
       through records and select the record to be deleted.
5.  Press and hold SET to delete record.
6.  “dEL OnE” will be displayed on LCD screen. Press 
       and hold SET to confirm.
“dEL dOnE” indicates successful deletion.
The no --- screen indicates successful deletion and there 
are no records stored.
If you decide to abort the delete action instead:
FOR
ACTION
RETURN TO SCREEN 
DISPLAY
User 1 record Press       twice User 1 records 
displayed
User 2 records 
displayed
User 2 record Press       once
1.  Press       or       to recall the latest measurement 
 
record for User 1 or User 2.
 
NOTE 
If you decide to abort the delete action instead:
NOTE 
FOR
ACTION
RETURN TO SCREEN 
DISPLAY
User 1 record Press       once User 1 records 
displayed
User 2 records 
displayed
User 2 record Press       twice
 
MEM
no
TECHNICAL SPECIFICATIONS
Application:
Measuring method                       
Oscillometric / noninvasive
Application                                    
For adult use only
Measurement location              Wrist section of lower arm
Memory                                        
Maximum 30 records
                                                   per user
Maximum number of users          
2
are low
-