Инструкции Пользователя для Viper LCD 2_Way

Скачать
Страница из 45
13
© 2012 Directed. All rights reserved.
status LED will flash twice as fast as it does when the system is armed. At 
the 20 - second point of the countdown, the siren will chirp to indicate that 
the system is about to arm. At the 30 - second point, the parking lights will 
flash to indicate that the system is armed.
The LCD remote responds to passive arming with one beep and the
 
 icon will flash 3- times to indicate successful arming of the system.
If any protected entry point (such as a door or a switch-protected trunk 
or hood) is open, the system will not passively arm (unless forced pas-
sive arming is programmed on. See Programming Options section.) 
Ad di tion al ly, if a door, hood or trunk is triggered during the arming 
count down, the 30 - second count down starts over.
When the system is armed:
s
Light impacts trigger the Warn Away® signal. When triggered, 
the siren chirps and the parking lights flash for a few seconds.
s
Heavy impacts trip a Triggered Sequence. The sequence consists 
of the siren sounding continuously and the parking lights flashing 
for a pre-programmed period, which can range in duration from 
1 to 180 seconds.
s
If a door is opened, the system will immediately start chirping the 
siren and flashing the parking lights. Three seconds later, the siren 
out put changes to a continuous blast. This pro gres sive re sponse 
gives you time to disarm the sys tem with your LCD remote if you 
inadvertently open the door while the system is armed, while 
still providing instant re sponse (even if the door is immediately 
closed).
s
Turning on the ignition key will trip the same progressive re sponse 
as opening a door.
s
The optional starter kill prevents the vehicle’s starter from cranking.
s
Any full trigger of the alarm system will immediately send an 
alarm page to your remote informing you that your vehicle should