Справочник Пользователя для ViewCast Oven 4100
Niagara 4100 User Guide
ViewCast
47
Apple HTTP Live Streaming Output tab
Figure 58. Apple HTTP Live Streaming Output tab
To configure output settings:
1. In the Publisher field, click Apple HTTP Live Streaming.
Note: Because the Niagara 4100 is a single-channel encoder, you can only connect and stream
one audio and video source at any given time. However, you can encode the same audio
and video at multiple data rates and multiple formats to provide the best user experience
for different viewing audiences.
and video at multiple data rates and multiple formats to provide the best user experience
for different viewing audiences.
2. Enable each Stream Rate you want to be available. The bandwidth is cumulative so you must
be careful not to exceed your network capability.
3. In the Initial Rate field, select a rate from the drop-down list.
4. In the Media Segment File, select the duration in seconds.
5. (Optional) Enable Add statistics overlay.
6. (Optional) Enable Allow client to cache content.
7. Enable Stream to HTTP Network Host.
8. Select the Host Address:
8. Select the Host Address:
http://
ftp://
Then enter the address in the next field.
9. Indicate the maximum HTTP Cache by dragging the slider for the number of files to maintain.
A duration will be shown in seconds.
10. Enable Create unique Subfolder to create a file that the system does not overwrite.
11. Enter the name of the Subfolder.
12. Enable Stream to File System.
13. Accept the default location that displays in the Folder field. If the field is blank, click the
11. Enter the name of the Subfolder.
12. Enable Stream to File System.
13. Accept the default location that displays in the Folder field. If the field is blank, click the
default folder link to automatically populate the field.