Справочник Пользователя для ViewCast Oven 4100

Niagara 4100 User Guide

ViewCast

Adobe Flash Dynamic Streaming Output tab

Figure 67. Adobe Flash Dynamic Streaming Output tab

To configure output settings:

1. In the Publisher field, select Adobe Flash Dynamic Streaming.

Note: Because the Niagara 4100 is a single-channel encoder, you can only connect and stream

one audio and video source at any given time. However, you can encode the same audio
and video at multiple data rates and multiple formats to provide the best user experience
for different viewing audiences.

2. Enable each Stream Rate that you want to be available. The bandwidth is cumulative so you

must be careful not to exceed your network capability.

3. Select the Duration of the GOP in seconds.

4. Enable the Embed System Time as Timecode.

5. Enter the Frame Interval.

6. (Optional) Enable the Add statistics overlay.

7.    Enable the Stream to Flash Media Server.
8.    Enter the FMS Address.
9.    Enter the Stream Name.
10.   Enable Stream to File System.
11.   Accept the default location that displays in the Folder field. If this field is blank, click the

default folder link to automatically populate the field.

Note: By default, the system sets this folder to D:\AVFiles. See Exporting captured video files

for instructions on saving video files to a USB device.

WARNING! ViewCast strongly recommends you do not alter the default directory setting

unless you fully understand the risk of saving your files to a directory not located on drive
D. If you save your files to another drive on the Niagara 4100, the system could delete the
files when you use the Restore to Niagara 4100 Factory Defaults feature.