Справочник Пользователя для Uniden UDC-5M

English

i Do not attempt to forcibly remove the card.
i Never remove the card when the camera is connected to a computer or 

printer, or when the self-timer indicator is flashing quickly. In doing so, you 
risk losing the data stored in the card.

i Not only do manganese batteries have a short battery life, but there is the 

danger of their overheating and causing damage to the digital camera.

i If you wish to use batteries other than the alkaline batteries (LR6), we 

recommend the following.
h AA-size nickel metal hydride (NiMH) rechargeable batteries (SANYO 

eneloop HR-3UTG) × 2

h AA-size Ni-Cd batteries (SANYO AA-size 2700 Series HR3-UG) × 2

i If the battery/card cover is opened while the power is on, important data 

may be lost. Uniden Corporation shall not be held responsible for any 
losses that result from failure to comply with this warning.

i When a card is installed, images are recorded to and played back from the 

card. When no card is installed, images are recorded to and played back 
from the camera’s internal memory. When the camera is turned on with no 
card installed, the internal memory icon 

 is shown on the monitor to let 

you know that the images you capture will be saved to the camera’s 
internal memory.

i This camera’s internal battery serves to maintain the date and time 

settings, as well as the shooting settings. The backup battery will be fully 
charged when the batteries are kept in the camera continuously for about 2 
days. In the fully charged state, the backup battery will maintain the 
camera settings for about 7 days.

i A small amount of power is still used even if the camera is turned off, and it 

is therefore recommended that the batteries be removed from the camera 
if it is not going to be used for a long time. Note that when the batteries are 
removed for a long period, the time and date settings may be cleared. 
Before using your camera again, be sure to confirm that the camera 
settings are correct.