Справочник Пользователя для Sun Microsystems Sun Crypto Accelerator 4000

Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003

▼

To Initialize the Sun Crypto Accelerator 4000
Board With a New Keystore

1. Enter

vcaadm

at a command prompt of the system with the Sun Crypto

Accelerator 4000 board installed or enter

vcaadm -h

hostname if the system is

remote, and select 1 to initialize the board:

2. Create an initial security officer name and password (Refer to “Naming

Requirements” on page 69):

3. Create a keystore name (Refer to “Naming Requirements” on page 69):

4. Select FIPS 140-2 mode or non-FIPS mode.

When in FIPS mode the Sun Crypto Accelerator 4000 board is FIPS 140-2, level 3
compliant. FIPS 140-2 is a federal information processing standard that requires
tamper-resistance and a high level of data integrity and security. Refer to the FIPS
140-2 document located at:

http://csrc.nist.gov/publications/fips/fips140-2/fips1402.pdf

# vcaadm -h

hostname

This board is uninitialized.

You will now initialize the board. You may

either completely initialize the board and

start with a new keystore or restore the board

using a backup file.

1. Initialize the board with a new keystore

2. Initialize the board to use an existing keystore

Your Choice (0 to exit) --> 1

Initial Security Officer Name:

sec_officer

Initial Security Officer Password:

Confirm Password:

Keystore Name:

keystore_name

Run in FIPS 140-2 mode? (Y/Yes/N/No) [No]: y