Справочник Пользователя для Sierra Wireless RAVEN 1X 20070914
Configuring your PinPoint X
Rev 3.0B Feb.08
40
•
Required variable parameters are denoted with italicized
text, example, Dn. The n is variable.
text, example, Dn. The n is variable.
•
Acceptable parameters and/or specific formats are listed
with each command.
with each command.
•
Most commands with parameters can be entered with ? to
read the current value (for example, AT&D? will respond
with “2” if the default has not been changed).
read the current value (for example, AT&D? will respond
with “2” if the default has not been changed).
•
Optional parameters are denoted with square brackets [ ].
•
AT Commands are not case sensitive. A capital “E” is the
same as a lower‐case “e”.
same as a lower‐case “e”.
•
When you are using a terminal connection, if you enter a
command which is recognized by the PinPoint X, it will
respond with “OK”. If the command is not recognized, the
response will be “ERROR”.
command which is recognized by the PinPoint X, it will
respond with “OK”. If the command is not recognized, the
response will be “ERROR”.
•
Those commands applicable only to certain model
numbers of the PinPoint X will be noted.
numbers of the PinPoint X will be noted.
Caution: Symbols listed with commands, such as *, /, &, or ?, are
part of the command and must be included. Commands with symbols
other than * may require PassThru mode.
part of the command and must be included. Commands with symbols
other than * may require PassThru mode.