Справочник Пользователя для Siemens AC75
AC75 AT Command Set
10.8 AT^SISW
s
AC75_ATC_V01.002
Page 283 of 569
10/30/06
Confidential / Released
10.8
AT^SISW Internet Service Write Data
The
command triggers a write operation (upload) and queries the amount of data already sent, but not
acknowledged at the TCP layer. The write operation may be run in binary mode, or in interactive text mode.
The
write command may return the following errors:
•
if there is a problem on application, socket, PPP or GPRS/GSM level. The
command and the "
" URC offer additional error information.
•
e.g. if the service has not network resources allocated.
•
e.g. if the service is not configured.
Syntax
Unsolicited Result Code
^SISW:
Data availability status of the Internet service configured with
has changed. The URC is issued when
the service is ready to accept new user data.
The URC is disabled in polling mode. See
, parameter "Tcp/WithURCs",
.
Parameter Description
0 ... 9 specified with
0...1500
Specifies the number of bytes to be sent with
Specifies the number of bytes to be sent with
or, if set to 0, requests the amount of data already sent
with
but not yet acknowledged:
• Parameter
may be 1...1500 bytes to specify the amount of data to be sent with
.
• If parameter
equals 0,
does not expect any data, but a normal query is per-
fomed. This allows the application to explictly request, in particular at the end of an upload job, the amount of
unacknowledged data at the TCP layer indicated by
• In interactive text mode,
must be set to any value greater than 0 (but not necessarily
the precise number of bytes). If set to 0 in interactive text mode,
would be interpreted
as query for unacknowledged data and, thus, prevent data transfer.
Test Command
AT^SISW=?
Response(s)
OK
Write Command
,
]]]
Response(s)
,
,
Number of data bytes as specified by
.
OK
ERROR
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
±
+
+
+
+
+
+
-
-
+
<srvProfileId>
(num)
<reqWriteLength>
(num)