Справочник Пользователя для Pelco Active Receiver TW3004AR

 

8

C1667M (6/06)

 

To attach the TW3004AR receiver to a wall using the supplied wall clip, refer to  Figure 2 and do the 
following:

1. Attach the wall clip to a wall using two screws (not supplied).

2. Slide the receiver into the clip until the two holes on the bottom of the receiver align with the 

two holes on the lower flange of the clip.

3. Attach the receiver to the clip using the two Phillips pan head screws provided with the clip.

 

Mounting the TW3004AR Using the Wall Clip

TW3004AR

SCREW, PHILLIPS 
PAN HEAD WITH 
LOCK WASHER (2)

WALL CLIP

LOWER
FLANGE

HORIZONTAL 
MOUNTING HOLE (2)

VERTICAL 
MOUNTING HOLE (2)

UPPER 
FLANGE