Справочник Пользователя для Mitsubishi Electronics M341i

   

Phone does not 

switch on

Check that the battery is fully charged and correctly connected to the phone.

No flashing battery 

icon whilst

charging

There may be no mains supply. Try a different electrical socket.

The AC/DC charger may be faulty. Return to your dealer and try substitution with 

another Mitsubishi Electric adaptor. If faulty, contact your dealer.

Short standby and 

talk times

Cell broadcast is permanently on, using more battery power. 

Phone is in a poor signal area and therefore always on full power. 

Incorrect charging and discharging. Always charge and discharge your battery 

fully.

The battery is wearing out. Replace the battery.

Impossible to dial 

numbers

Keypad lock is on (

 appears). Press 

 and «#» to turn the keypad lock off.

Impossible to 

make or receive a 

call

Check that at least one signal strength bar (

) is displayed. Try a stronger signal 

strength area.

If no network name is displayed, check registration and area coverage with your 

service/network provider and check that the SIM is correctly inserted. 

Call barring option is on. Deactivate it (see page 69). Call cost limit is reached 

(see page 31).

Stored telephone 

numbers cannot be 

recalled 

Fixed Dialled Number or Call Barring features are activated. Deactivate feature. 

(see pages 69).

The mobile is on 

but nothing is 

displayed.

Display contrast is too low. Reset contrast (see page 62).

Battery icon 

 

not flashing 1-2-3-

4-5 during 

charging

May indicate a charge or battery problem. Disconnect the charger. Reconnect and 

try again. 

May also indicate that the battery is fully recharged and does not require any 

further charging.

 symbol 

displayed

There is not enough memory to store another e-mail or another MMS. Delete one 

or more of the existing stored messages.

Flashing 

There is not enough memory to store another SMS message. Delete one or more 

of the existing stored messages.