Справочник Пользователя для LXE Home Security System VX-7
Step 3 – Assemble Optional Keyboard Brackets
1.
If using the optional integrated keyboard mount, attach the keyboard mounting bracket to the
RAM mounting bracket with three 1/4-20x5/8 bolts, using one flat washer and one locking
washer per bolt. Place the locking washer on the bolt before the flat washer.
RAM mounting bracket with three 1/4-20x5/8 bolts, using one flat washer and one locking
washer per bolt. Place the locking washer on the bolt before the flat washer.
2.
If using the optional integrated keyboard mount, attach the keyboard to keyboard mounting
plate, using the appropriate screws:
plate, using the appropriate screws:
•
For the 95 key keyboard, use four 8-32x5/8 screws
•
For the 60 key keyboard, use four 10-32x5/8 screws
Note Excess keyboard cable length can be looped around the hooks on the bottom
of the keyboard mounting plate.
Step 4 – Attach VX7 and Bracket Assembly to RAM Mount
1.
If the optional integrated keyboard bracket is not used, slip the RAM arm over the ball on the
vehicle RAM ball bracket. Insert the ball of the RAM mount bracket into the RAM arm. Adjust
the VX7 to the desired position and tighten the knob on the RAM arm using the supplied RAM
wrench.
vehicle RAM ball bracket. Insert the ball of the RAM mount bracket into the RAM arm. Adjust
the VX7 to the desired position and tighten the knob on the RAM arm using the supplied RAM
wrench.
2.
If using the optional integrated keyboard bracket, there are two arms included. Slip the
larger RAM arm over the ball on the vehicle RAM mount bracket. Insert the ball of the RAM
mount bracket into the RAM arm. Adjust the VX7 to the desired position and tighten the knob
on the RAM arm using the supplied RAM wrench.
Slip the smaller arm over the RAM ball on the keyboard mounting bracket. Insert the RAM
ball on the keyboard mounting plate into the RAM arm. Adjust the keyboard to the desired
position and tighten the knob on the RAM arm using the supplied RAM wrench.
larger RAM arm over the ball on the vehicle RAM mount bracket. Insert the ball of the RAM
mount bracket into the RAM arm. Adjust the VX7 to the desired position and tighten the knob
on the RAM arm using the supplied RAM wrench.
Slip the smaller arm over the RAM ball on the keyboard mounting bracket. Insert the RAM
ball on the keyboard mounting plate into the RAM arm. Adjust the keyboard to the desired
position and tighten the knob on the RAM arm using the supplied RAM wrench.
Note Excess keyboard cable length can be looped around the hooks on the bottom
of the keyboard mounting plate.
Make sure there is a minimum 1” (25.4 mm) clearance between the VX7 and
the keyboard.
the keyboard.