Справочник Пользователя для Iomega G3
4. Unpack the Buz card.
CAUTION
Touch a grounded metal object to discharge any build-up of static
electricity before handling the Buz card.
M
Handle the card by its edges. If you lay it down, place it on the static-proof bag it is
shipped in.
shipped in.
5. Push the Buz card FIRMLY into the PCI slot, then
replace the PCI slot cover screw.
Bracket
flush to chassis
flush to chassis
Connector
fits evenly
fits evenly
PCI slot
Optional:
Connect internal
SCSI device Data
cable here
Connect internal
SCSI device Data
cable here
Pin 1
Ensure the bracket fits flush against the chassis. The connector should fit evenly on
both ends of the PCI slot to ensure a good connection.
both ends of the PCI slot to ensure a good connection.
M Optional internal drive installation:
If you are connecting an internal SCSI
drive to the SCSI connector on your Buz card, you may want to install or connect it
at this time.
at this time.
M
6