Справочник Пользователя для HP Cell Phone Accessories E6380-90019
Chapter 2
39
Operating Overview
Displaying Analog Measurements
Displaying Analog Measurement Results on a Meter Scale
Figure 2-6 Displaying the Meter Scale
Measurement results can be displayed on a meter scale. The digital
numeric value is still displayed (but smaller) under the meter scale.
numeric value is still displayed (but smaller) under the meter scale.
To display the meter scale
Step 1. Move the cursor to the unit-of-measure field for the
measurement you want displayed on the meter.
Step 2. Press and release the blue
Shift
key, then the
Incr Set
key to
access the meter function.
Step 3. Select
On/Off
from the Meters: menu (or press the
On/Off
key).
To set the meter’s end points and scale intervals
Step 1. Use the knob to select the unit-of-measure field for the
measurement you want displayed on the meter.
Step 2. Press and release the blue
Shift
key, then the
Incr Set
key to
access the meter function.
Step 3. Select
Hi End
,
Lo End
, or
Interval
from the
Meters:
menu
and enter the value for your selection, then press the
Enter
key.
Step 4. Repeat steps 2 and 3 until you have set the desired
parameters for the meter’s scale.
Unit-of -Measure
Fields
Meters:
On/Off
Lo End
Hi End
Intervals
Lo End
Hi End
Intervals
Main Menu