Справочник Пользователя для Clifford 420.4X

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine.

1. With the engine running, set the parking brake and leave the

engine running.
For Pit Stop or Turbo Timer mode (to leave the engine running
after locking), open the driver door.

2. Release the foot brake (if pressed during Step 1), or press and

release the foot brake anytime. As long as the engine is running
there is no time limit to perform this step.

3. Within 20 seconds of foot brake release, press any command

button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.

4. The parking lights ﬂash 5 times to conﬁrm MTS mode is enabled

and the remote start activates the ignition outputs.

5. Turn Off and remove the key from the ignition switch, the engine

remains running.

6. Exit the vehicle, close all the doors and lock the system.
7. The engine turns off. If the door is opened in Step 1 then the

engine continues to run.