Справочник Пользователя для Apple Macintosh Server G4
Troubleshooting
Symptom Charts/ Error Tones - 4 5
Error Tones
Note:
Error tones occur before system software loads.
Computer beeps once
at startup
at startup
One beep means that no RAM is installed or detected.
1
1
If no DIMM is present, install a known-good DIMM in the top
slot and try again.
slot and try again.
2
Reseat the DIMMs.
3
Run Apple Hardware Test. If the test finds bad memory,
replace the DIMMs one at a time and test until all bad DIMMs
are replaced with known-good modules.
replace the DIMMs one at a time and test until all bad DIMMs
are replaced with known-good modules.
4
Reseat the processor module.
5
Replace the processor module.
6
Replace the logic board.