Инструкции Пользователя для BMW 2006 M6 Coupe
Replacing components
190
Disposal
After replacement, have old batteries dis-
posed of by your BMW center or deposit
posed of by your BMW center or deposit
them at a recycling center. Maintain the battery
in an upright position for transport and storage.
Always secure the battery to prevent it from tip-
ping over during transport.
in an upright position for transport and storage.
Always secure the battery to prevent it from tip-
ping over during transport.
<
Power failure
Following a temporary interruption of the power
supply, the operation of some equipment is lim-
ited and must be reinitialized. Individual settings
are also lost and must be updated:
supply, the operation of some equipment is lim-
ited and must be reinitialized. Individual settings
are also lost and must be updated:
>
Seat, mirror and steering wheel memory
The position must be stored again, refer to
page
The position must be stored again, refer to
page
>
Time and Date
The values must be updated, refer to
page
The values must be updated, refer to
page
>
>
Navigation system
Wait until the system starts, refer to
page
Wait until the system starts, refer to
page
.
Fuses
Never attempt to repair a blown fuse, and
do not replace a defective fuse with a sub-
do not replace a defective fuse with a sub-
stitute of another color or amperage rating, as
this could lead to overloading of the wiring, ulti-
mately resulting in a fire in the vehicle.
this could lead to overloading of the wiring, ulti-
mately resulting in a fire in the vehicle.
<
Spare fuses and a pair of plastic tweezers are
located in the compartment for the onboard tool
kit, refer to page
located in the compartment for the onboard tool
kit, refer to page
Information on fuse allocation is located below
the bracket for the onboard tool kit, see below.
the bracket for the onboard tool kit, see below.
In glove compartment
1.
Press the button on the back in the center of
partition
partition
1 and pull out the partition upward,
arrow
2.
2.
Press the coupling downward, arrow
3, and
fold the lid
4 forward.
In luggage compartment
Fold the cover under the floor mat upward and
remove the bracket for the onboard tool kit.
Information on fuse allocation
remove the bracket for the onboard tool kit.
Information on fuse allocation
1 and additional
fuses
2 are provided there.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG