Руководство По Работе для Sony STR-DN1040
68
US
• Not Allow: The receiver restricts a
new device that is accessing the
receiver. When connecting a new
device to the home network, add the
device to the device list, and set access
permission (page 68).
receiver. When connecting a new
device to the home network, add the
device to the device list, and set access
permission (page 68).
Up to 20 devices can be added to the device list.
If 20 devices have already been registered,
“Device Full” appears, and a new device cannot
be added to the list. In this case, delete
unnecessary devices from the list (page 68).
If 20 devices have already been registered,
“Device Full” appears, and a new device cannot
be added to the list. In this case, delete
unnecessary devices from the list (page 68).
To add devices to the
device list
device list
1
Select “Control Device” in “Access
Settings”, then press
Settings”, then press
.
The registered device list appears on the
TV screen.
TV screen.
2
Select “Add Device”, then press
.
3
Select the device you want, then
press .
The selected device is added to the
device list. For details on setting the
access, see “To set access permission for
the devices” (page 68).
press .
The selected device is added to the
device list. For details on setting the
access, see “To set access permission for
the devices” (page 68).
To set access permission
for the devices
for the devices
You can set access permission for a device
on the device list. Only devices set to
“Allow” are recognized on the home
network.
on the device list. Only devices set to
“Allow” are recognized on the home
network.
1
Select “Control Device” in “Access
Settings”, then press
Settings”, then press
.
The registered device list appears on the
TV screen.
TV screen.
2
Select the device you want, then
press .
press .
3
Select “Access”, then press
.
4
Select “Allow” or “Not Allow”, then
press .
press .
To delete a device from the list
Select “Delete” in step 3 in “To set access
permission for the devices” (page 68), then
press .
Select “OK” on the confirmation display,
then press
permission for the devices” (page 68), then
press .
Select “OK” on the confirmation display,
then press
.
TV SideView is a free mobile application
for the remote device (smartphone, etc). By
using the TV SideView with this receiver,
you can easily enjoy the receiver by the
operation on your remote device.
for the remote device (smartphone, etc). By
using the TV SideView with this receiver,
you can easily enjoy the receiver by the
operation on your remote device.
To register the TV SideView
Device
Device
1
Press HOME NETWORK.
You can also select “Home Network” from
“Listen” in home menu.
“Listen” in home menu.
2
Press OPTIONS.
3
Select “TV SideView Device
Registration”, then press
Registration”, then press
.
4
Select “Start Registration”, then
press .
The receiver starts to detect TV
SideView device that is ready for
registration.
“Connecting” appears on the TV screen.
Press “Registration” on the TV
SideView device. However, the receiver
will exit the registration if no device
detected in 30 seconds.
press .
The receiver starts to detect TV
SideView device that is ready for
registration.
“Connecting” appears on the TV screen.
Press “Registration” on the TV
SideView device. However, the receiver
will exit the registration if no device
detected in 30 seconds.
5
Select “Finish”, then press
.
To cancel the registration
Select “Cancel” in step 4, then press
.
Up to 5 TV SideView devices can be added to the
device list. If 5 devices have already been
registered, “Device Full” appears, and a new
device cannot be added to the list. In this case,
delete unnecessary devices from the list
(page 69).
device list. If 5 devices have already been
registered, “Device Full” appears, and a new
device cannot be added to the list. In this case,
delete unnecessary devices from the list
(page 69).
Note
Using the TV SideView
Tip
Note