Инструкция С Настройками для Burnham ES2 ES2

  VENT THIS BOILER according to the instructions. Failure to do so may cause products of 

           combustion to enter the building resulting in severe property damage, personal injury or death.

  Install this boiler according to this manual and the National Fuel Gas Code, ANSI Z223.1/NFPA 54,  

If you are removing an existing boiler from a gas 

vent or chimney that is also used to vent other gas 

appliances:

  Seal any unused openings in the  

common venting system.

  Visually inspect the venting system    

for proper size and horizontal pitch    

and determine there is no blockage or  

restriction, leakage, corrosion, and other  

deficiencies which could cause an    

unsafe condition.

  Resize the common venting system    

to approach the minimum size as  

 

determined using the National Fuel Gas  

Code, ANSI Z223.1 and/or CAN/CSA  

B149.1, Installation Codes.

  Check the draft of each remaining  

 

appliance using the procedure described  

in Appendix G, checking draft and  

combustion.

  Correct any draft problems before  

 

placing the gas appliances back into  

service.