Справочник Пользователя для Raritan Computer Home Theater Server KX2101-v2.20-0B-E
Chapter 2: Installation and Configuration
24
Local User Port
The KX II-101 is available with optional video and PS/2 cables (KX II-
101-LPKVMC) that enable you to attach a keyboard and mouse to the
target server through the Local User port. The Local User port serves as
a pass-through to the target server to which the KX II-101 is attached
and has no other purpose. The KX II-101 must be powered on to use the
Local User port.
101-LPKVMC) that enable you to attach a keyboard and mouse to the
target server through the Local User port. The Local User port serves as
a pass-through to the target server to which the KX II-101 is attached
and has no other purpose. The KX II-101 must be powered on to use the
Local User port.
For USB configurations, only the local video connects to the target server
at the Local User port. The keyboard and mouse connect directly to the
target server using USB ports.
at the Local User port. The keyboard and mouse connect directly to the
target server using USB ports.
Note: Only PS/2 host interface connectivity is supported on the Local
User port and you must restart the target server after connecting to the
KX II-101 using PS/2 connectors.
User port and you must restart the target server after connecting to the
KX II-101 using PS/2 connectors.
Step 4: Configure the KX II-101
The KX II-101 can be configured in two ways:
•
Using the web-based KX II-101 Remote Console, which requires the
device to have a network connection to your workstation.
device to have a network connection to your workstation.
•
Using a terminal emulation program like HyperTerminal, which
requires a direct connection from the device's Admin port to your
workstation. The cable for this connection is included with the KX II-
101.
requires a direct connection from the device's Admin port to your
workstation. The cable for this connection is included with the KX II-
101.
This section describes both ways of configuring the KX II-101.
Configure the KX II-101 Using the Remote Console
The KX II-101 Remote Console is a web-based application that enables
you to configure the device prior to use and manage it after it has been
configured. Before configuring the KX II-101 using the Remote Console,
you must have both your workstation and the device connected to a
network.
you to configure the device prior to use and manage it after it has been
configured. Before configuring the KX II-101 using the Remote Console,
you must have both your workstation and the device connected to a
network.
You can also use a terminal emulation program to configure the KX II-
101. See
101. See
Configure the KX II-101 Using a Terminal Emulation
Program (Optional)
(on page 29).
Setting a New Password
When you first log into the Remote Console, you are prompted to set a
new password to replace the default. Then you can configure the KX II-
101.
new password to replace the default. Then you can configure the KX II-
101.
1. Log into a workstation with network connectivity to your KX II-101
device.