Справочник Пользователя для Brother NV6000D
SEWING THE STITCHES
106
c
Press
to set the machine to free motion
sewing mode.
→ The key appears as
, the quilting foot is raised
to the necessary height, and then the feed dogs are
lowered for free motion sewing.
lowered for free motion sewing.
a Free motion quilting foot “C”
→ When stitch Q-01 or 1-31 is selected, free motion
→ When stitch Q-01 or 1-31 is selected, free motion
quilting foot “C” is indicated in the upper-left corner
of the screen.
of the screen.
d
Remove the presser foot holder (see page
55).
55).
e
Attach free motion quilting foot “C” at the
front with the presser foot holder screw
aligned with the notch in the quilting foot.
front with the presser foot holder screw
aligned with the notch in the quilting foot.
a Presser foot holder screw
b Notch
f
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the screwdriver with
your left hand.
right hand, and tighten the presser foot
holder screw using the screwdriver with
your left hand.
a Presser foot holder screw
g
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
a
Note
• Make sure that the quilting foot is attached
properly and not slanted.
CAUTION
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
may touch the quilting foot, causing it to bend
or break.