Справочник Пользователя для Brother NV6000D

SEWING THE STITCHES

tili
ty Stit

ch
es

141

Place the fabric under the presser foot.

Move the fabric to the desired position for
edge sewing. Position the fabric so that its
edge is as straight as possible.

a Fabric

Check that the built-in camera is correctly
detecting the fabric.

Press

to change the colors of the fabric edge

indicator line and starting point according to the
color of the fabric. Each press of this key changes
the color of the fabric edge indicator line to red
(with a blue starting point), blue (with a black
starting point) or black (with a red starting point).

a Key for changing the color of the fabric edge

indicator line

b Fabric edge indicator line

When the Built-In Camera Can Detect the Edge of
the Fabric

The fabric edge indicator line appears correctly
following the edge of the fabric.

a Fabric edge indicator line

Note

• Before pressing

, install the vertical

stitch alignment foot “V” and position the
edge sewing sheet; otherwise, the built-in
camera cannot detect the fabric.

is pressed before the edge sewing

sheet is positioned, the message shown in
step

appears again.

• After pressing

, do not place your

hands or any other object near the needle
plate until the message “Recognizing...”
disappears.

Note

• When pinning the fabric, insert the pins as

shown below. If the head of the pin extends
off the edge of the fabric, the fabric may not
be correctly detected.

a Basting pin