Справочник Пользователя для Brother NV6000D
CHANGING THE NEEDLE
56
CHANGING THE NEEDLE
Press
o
o
o
o
in this order to display a
video example of the operation on the LCD (see
page 34). Follow the steps explained below to
complete the operation.
page 34). Follow the steps explained below to
complete the operation.
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Press .
*
If the message “OK to automatically lower the
presser foot?” appears on the LCD screen, press OK
to continue.
presser foot?” appears on the LCD screen, press OK
to continue.
o The entire screen becomes white, and all keys and
operation buttons are locked.
c
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw. Remove the needle.
toward the front of the machine and loosen
the screw. Remove the needle.
CAUTION
• Always press
on the screen before changing the needle. If
is not pressed and the Start/
Stop button or another operation button is pressed accidentally, the machine will start and injury may
result.
result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause
injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
• To check the needle correctly, place the flat
side of the needle on a flat surface. Check
the needle from the top and the sides. Throw
away any bent needles.
the needle from the top and the sides. Throw
away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
b Level surface (bobbin cover, glass, etc.)
Note
• Before replacing the needle, cover the hole
in the needle plate with fabric or paper to
prevent the needle from falling into the
machine.
prevent the needle from falling into the
machine.
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.
machine.