Справочник Пользователя для Brother NV6000D
STITCH SETTINGS
Se
wi
n
n
g Ba
sics
67
2
Setting the Stitch Length
Follow the steps below when you want to change
the stitch pattern length.
the stitch pattern length.
Example:
Press
to shorten the stitch length.
o The value in the display gets smaller.
Press
to lengthen the stitch length.
o The value in the display gets bigger.
Setting the Thread Tension
You may need to change the thread tension,
depending on the fabric and thread being used.
Follow the steps below to make any necessary
changes.
depending on the fabric and thread being used.
Follow the steps below to make any necessary
changes.
■ Proper Thread Tension
The upper thread and the bobbin thread should
cross near the center of the fabric. Only the upper
thread should be visible from the right side of the
fabric, and only the bobbin thread should be visible
from the wrong side of the fabric.
cross near the center of the fabric. Only the upper
thread should be visible from the right side of the
fabric, and only the bobbin thread should be visible
from the wrong side of the fabric.
a Wrong side
b Surface
c Upper thread
d Bobbin thread
b Surface
c Upper thread
d Bobbin thread
Memo
• Press
to check changes made to the
stitch.
• Press
to return the stitch length to
the original setting.
CAUTION
• If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.