Справочник Пользователя для Brother KIT I

23

In the embroidery edit screen, the size of the pattern 
can be changed while the desired thread density is 
maintained.
With this function, the pattern will be enlarged or 
reduced at a larger ratio than with normal pattern 
resizing.

a

b

c

d

e

→ The pattern will be returned to its original size, 

angle, and position as it was before it was edited.

• Be sure to sew trial embroidery using same fabric 

and threads as project in order to check the sewing 
results.

• This function cannot be used with alphabet 

character patterns, frame patterns or border 
patterns. However, a border pattern can be edited 
after this function has been used.

• Patterns with a large number of stitches (about 

100,001 or more) cannot be resized while 
maintaining a desired thread density. The maximum 
limit for the number of stitches differs depending on 
the data size of pattern.

• If this function is used, thread density is maintained 

while the pattern is enlarged/reduced. However, the 
needle drop point pattern is not entirely maintained. 

Use the normal resizing mode 

 

depending on the results of trial embroidering. 

• Stitch Recalculator cannot be used if the key 

appears as 

.