Руководство По Работе для Zorki 10

 

Fig. 9  

Close the back cover. Cock the shutter, 

then release it. Do this operation until the 
number 36 on the exposure counter scale 
matches the index (Fig. 9).  

 

Fig. 11  

Set the film sensitivity, rotating the film 

sensitivity ring until necessary number of 
ASA units or DIN grades appears in the 
window (Fig. 11).  

Fig. 10  

 Set the automatic setting lever 13 (Fig. 3) 

at "A" or "Automatic" (Fig. 10). 
It is possible to take pictures with the 
"Zorki-10" camera without diaphragm and 
exposure time presetting. Point the camera 
at the subject to be taken. Observing the 
object, bring it to the center of the bright-
line frame and pressing gently (without 
jerking) shutter release key until it goes, 
release the shutter. 

When the light levels are not suitable for photography the 
viewfinder needle appears in the zone of red-colored line 
(Fig. 12). To photograph at this light change the film for one 
with higher sensitivity, or work with flash-lamp or with "B" 
time exposure.  

Fig. 12 

When taking a photograph at around 1.5 m (5 ft.) use the 
inside markings just inside the bright-line frame (small 
frame) (Fig. 13), and at other distances use the outside 
markings (large frame). 
To take photographs automatically set the automatic setting 
lever at "A". 
The mechanism of automatic exposure setting is so designed 
that, when changing the brightness of the object to be 
photographed, the exposure time and the diaphragm are 
simultaneously changing according to the set film sensitivity.
At bright light after the shutter release key is pressed the 
short exposure time and small aperture are set automatically, 
and in subdued light, on the contrary, the longer exposure 
time and larger aperture are set.  

Fig. 13