Справочник Пользователя для Brother 885-X36

USING ATTACHMENTS AND APPLICATIONS

—

Gathering

Loosen the tension of the upper thread so
that the lower thread lies on the underside
of the material.

Sew a single row (or many rows) of
straight stitches.

Pull the lower threads to gather the
material.

Darning

Raise the presser foot lever, and then slide
the feed dog position switch to

(see

page 13).

Remove both the presser foot and presser
foot holder assembly and then lower the
presser foot lever.

Put the section you want to darn under
the presser foot together with fabric for
reinforcement.

Turn on the machine.

Begin sewing by alternating between
gently drawing the work away from you
and pulling it toward you.

Note

● Sew while holding the fabric stretched in

order to keep the fabric held down.

Repeat this motion until the section being
darned is filled with parallel lines of stitching.

When you are finished darning, slide the
feed dog position switch to

(see

page 13), and turn the handwheel to raise
the dogs.

Memo

● The feed dog position switch is normally set

to the right side.

● The feed dogs come up when you start

sewing again.

Appliqués

You can create an appliqué by cutting a different piece
of fabric into a shape and applying it as a decoration.

Baste the cut design to the fabric.

Carefully sew around the edge of the
design with a zigzag stitch.

Stitch Name

Pattern

Stitch Length

[mm (inch)]

Straight Stitch

4 (3/16)

Stitch Name

Pattern

Stitch Length

[mm (inch)]

Straight Stitch

Any

Stitch

Name

Pattern

Stitch Length

[mm (inch)]

Stitch Width

[mm (inch)]

Zigzag

Stitch

F-2

(1/64-1/16)

Any