Инструкции Пользователя для Viper LED 2_Way

19

© 2013 Directed. All rights reserved.

Remote Control Configuration

The Responder LE and 1-way companion remote controls have op-
erations that can be configured to a user’s personal preferences. The 
following instruction directs you through the available programming 
options for both remote controls.

Remote Programming

To Enter Programming:  Press and hold the 

button for eight sec-

onds, the remote emits one long beep and the transmit LED turns on to 
indicate the Main Menu is accessed. 

To Exit Programming: Press and release the 

button once then press 

and hold the  

 button again until the transmit LED shuts off.

Remote Pairing 

The following instructions step you through the remote pairing opera-
tion of the Responder LE 2-way or 1-way companion remote.

Prepare the vehicle system for pairing:
1.  Open at least one of the vehicle’s doors.
2.  Turn the key to the ON position.
3.  Within five seconds press and release one time the Control but-

ton on the Control Center. 

4.  Within five seconds, press and hold the Control button. The sta-

tus LED will flash one time and the siren will chirp once to confirm 
the system is ready for remote pairing.

5.  Release the Control button and proceed below. 

Prepare the remote control for pairing:
6.  Enter programming to access the Main Menu as previous ex-