Инструкции Пользователя для Viper LED 2_Way

36

© 2013 Directed. All rights reserved.

Out of Range

Each time a command is performed the Responder LE will expect a 
command confirmation from the system. If a command confirmation 
is not received the 

and transmit LED’s flash and a long fault tone 

plays as an alert.

No Remote Output

Occasionally when a command is performed the remote may not 
generate a command confirmation output or Out of Range output. 
This indicates that the system received the command but it was an 
incomplete command (e.g. Aux button pressed too short to activate 
the trunk release) or it was an illegal message (e.g. the command was 
corrupted due to local RF interference). These are temporal nuances 
of the system and remote, perform the command again within 10 
seconds to return to normal operation.

Feature not Available

The Feature Not Available output (

LED on and long fault tone)  is a 

generic one which varies in cause and solution depending upon the 
command used:

Command

Cause

Reason/Solution

Runtime Reset

Remote Start is Off

Only available when Remote Start is On

Sensor Bypass

System is not armed

Only available when system is armed

Defroster

Remote Start is Off.
Not configured for 
this.

Only available when Remote Start is On.
Only available when configured for 
Defroster control.