Инструкции Пользователя для Viper SmartStart System

lowed by a long chirp. Zone 2 is now bypassed.

Press

a third time within ﬁve seconds. The siren chirps three times

followed by a long chirp. Zone 4 is now bypassed.

Press

a fourth time within ﬁve seconds. The siren chirps four times

followed by a long chirp. Zones 2 and 4 are now bypassed.

Press

a ﬁfth time within ﬁve seconds. The siren chirps ﬁve times

followed by a long chirp. All input zones, except the ignition are now
bypassed.

Note:

Multi-level security arming only applies to a single arming cycle.

Once the system is disarmed and then re-armed, all the zones will be
active again.

Arming while driving

Your security system can be armed while driving the vehicle.

Press

on the remote control for two seconds while the vehicle is

running. The siren/horn will sound once to indicate that the security
system is armed, and then once more to indicate that the ig ni tion is on.
The system will not respond to any input except the door triggers, and
the starter kill relay (if installed) will not be activated. Once you have
arrived at your des ti na tion, the system will disarm when the ignition is
turned off. The siren/horn will sound twice and the LED will then stop
ﬂashing. The system can also be disarmed at any time by pressing

High security disarm

This security system offers High Security Disarm. High Security Disarm
is a feature that makes it possible to silence and reset the system while
it is triggering, without disarming the system.