Инструкции Пользователя для Viper SmartStart System
13
© 2010 Directed Electronics. All rights reserved.
the climate control system. If interior heating or cooling is desired, the
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
Warning!
(1) Never remote start your vehicle when
the keys are in the ignition, except when performing
Valet® Take-Over, and (2) Never start the vehicle if it
is not in PARK or NEUTRAL
Valet® Take-Over, and (2) Never start the vehicle if it
is not in PARK or NEUTRAL
To remote start the vehicle:
• Press
• Press
on the remote control once.
The parking lights flash to confirm that the vehicle will attempt to
start. With gas vehicles the engine starts 4 seconds after the park-
ing lights flash. With diesel vehicles the engine starts when the
WAIT-TO-START indicator on the dashboard goes out or the pro-
grammed delay has ended.
Once the vehicle has started, it runs for the pre- pro gram med pe-
riod of time or until a shutdown input is trig gered.
start. With gas vehicles the engine starts 4 seconds after the park-
ing lights flash. With diesel vehicles the engine starts when the
WAIT-TO-START indicator on the dashboard goes out or the pro-
grammed delay has ended.
Once the vehicle has started, it runs for the pre- pro gram med pe-
riod of time or until a shutdown input is trig gered.
Warning!
It is unsafe to operate a vehicle’s motor in a
garage or other closed off area. Breathing the ex haust
from the vehicle is hazardous to your health. Never
activate the remote start in an enclosed space.
from the vehicle is hazardous to your health. Never
activate the remote start in an enclosed space.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn it to the On position.
2. Press the brake pedal.
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON position,
the engine will shut down.
the engine will shut down.