Инструкции Пользователя для Viper SmartStart System

4

© 2010 Directed Electronics. All rights reserved.

Basic Commands

Arm/Lock

Press

 and release 

The alarm arms, doors lock (if connected), and the siren/horn sounds 
and parking lights flash once. If Valet mode* is On, the doors lock. Exit 
Valet mode to arm/lock the alarm normally.

To Arm/lock and Panic

Press 

and

 hold

 

The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the 
siren/horn and flashes the parking lights.  

Disarm/Unlock

Press

 and release

 

 

The alarm disarms, doors unlock (if connected), and the siren/horn 
sounds and parking lights flash twice. Turns panic off if on. If Valet 
mode* is On, the doors unlock.

AUX

Press

 and release 

Perform before the Arm/lock or Disarm/unlock command to use the 
remote control in  Silent Mode™.

Note:

 The Warn away response to lighter impacts is bypassed if the 

system is armed using silent mode. this ensures that no chirps are emit-
ted by the siren in an area you want chirp -free but the system is fully 
capable of triggering.