Справочник Пользователя для Vertical Edge 120
Edge 120 Digital Executive Telephone User Guide
Page 15
Saved Number Redial
FEATURE
Saved Number Redial is normally used whenever you want to retain a
telephone number to be dialed later. The same feature code is used to
Save a Dialed Number (SDN) and to dial the saved number – Saved
Number Redial (SNR).
telephone number to be dialed later. The same feature code is used to
Save a Dialed Number (SDN) and to dial the saved number – Saved
Number Redial (SNR).
Operation – SDN
1. After you’ve placed an outside line call for which you want to
store the number, press
FEATURE
.
2. The dialed number is stored in the Saved Number memory.
Operation – SNR
1. When the telephone is idle, press the
FEATURE button
designated as REDIAL (if available) or press
FEATURE
.
2. The stored number is dialed.
Speed Dial
Extension
–
System
–
Speed Dialing allows you to store frequently dialed numbers. There
are 20 speed “bins” for most extensions and 200 system speed bins
that may be shared by all extensions.
are 20 speed “bins” for most extensions and 200 system speed bins
that may be shared by all extensions.
Operation – Setup
1. Press
FEATURE
.
2. Dial the Speed Dial location number (
–
).
3. Press
[
show]. The current contents are displayed.
4. Press
[
chg].
5. Input the number you want to store, including Pauses (
FEATURE
), Flash
FEATURE
and Pulse To Tone Conversion (
)
codes.
6. Press
[
save]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or
hang-up (press
SPK twice) to exit.