Справочник Пользователя для Xantrex SW Communications Adapter
3.0 OPERATION
10
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
Function Keys and Other Displays
On the virtual control panel simulation, the buttons of the real control panel
have been replaced with labels shown as F1 through F10. These refer to the function
keys of the computer keyboard which are located either above or next to the main
keyboard area. Each function key is associated with a specific inverter operation.
Pressing the appropriate function key causes the display on both the inverter and the
PC screen to change accordingly.
keys of the computer keyboard which are located either above or next to the main
keyboard area. Each function key is associated with a specific inverter operation.
Pressing the appropriate function key causes the display on both the inverter and the
PC screen to change accordingly.
The virtual control panel also shows the LCD display window on the inverter’s
control panel. This will show the same information that is available at the inverter.
When no adapter is available, the text “ADAPTER OFFLINE” appears. When an
SWCA has been successfully connected, the LCD display window of the control panel
simulator shows what is displayed on the inverter LCD display (e.g., adapter 3).
When no adapter is available, the text “ADAPTER OFFLINE” appears. When an
SWCA has been successfully connected, the LCD display window of the control panel
simulator shows what is displayed on the inverter LCD display (e.g., adapter 3).
To the right of the LCD display area on the control panel simulator is an area
where the status of the inverter’s LED indicators are displayed. Any active LEDs are
displayed by the label description of the LEDs function being shown. If the LED is
flashing on the inverter, then the label description of the LED will also flash on the
control panel simulator.
displayed by the label description of the LEDs function being shown. If the LED is
flashing on the inverter, then the label description of the LED will also flash on the
control panel simulator.
Since the same menu system is used with the control panel simulator as with
the inverter itself, the operation of the SWCA will be familiar to anyone who has
programmed a SW series inverter/charger system. The only difference is the use of
the function keys instead of the buttons.
programmed a SW series inverter/charger system. The only difference is the use of
the function keys instead of the buttons.
The SWCA Programming Menu
The SWCA Programming Menu provides the means to change the SWCA ID
number or for changing the adapter’s configuration code. It also provides the
means for applying a textual identification labels.
means for applying a textual identification labels.
Below the “LCD” display on the computer version, the word “ADAPTER”
appears. This shows which inverter is being accesssed. To access the different
inverters, simply enter the ID number of the inverter (1-8) that you want to control
by using the computer’s numeric keys.
inverters, simply enter the ID number of the inverter (1-8) that you want to control
by using the computer’s numeric keys.
$GDSWHU,'1XPEHU
&RQILJXUDWLRQ$
&RQILJXUDWLRQ%
6HULDO1XPEHU
6RIWZDUH,' 6:&$9HU
&XVWRPHU,'
6LQH:DYH&RPPXQLFDWLRQV0HPRU\$GDSWHU352*5$00,1*0(18
3UHVV (6&!WRUHWXUQWR6:)URQW3DQHO6LPXODWLRQ
)! 1HZ$GDSWHU,'
)! 1HZ&RQILJXUDWLRQ
)! 1HZ&XVWRPHU,'
67$786 2.
Figure 3-2
SWCA Programming Menu Display