Справочник Пользователя для UTStarcom IAN-02EX

 

Telephone’s Analogue Adapter  –  UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual 

pag.4

 

First of all, you have to make the physical connection of the equipment, following the simple instructions hereafter 
included: 

 

Internet

Internet

 

 

 

 

insert the rj-45 Ethernet cable into the 
port ENET port of the iAN-02EX ATA 

 

connect the other end of the cable to the 
Ethernet port of your personal computer 

 

connect the analogue telephone to the 
ATA’s “PHONE1” port 

 

if you have subscribed a VoIP second 
line, connect another analogue telephone 
to the ATA’s “PHONE2” port 

 

connect the power adapter provided with 
the iAN-02EX to the wall socket 

 

insert the Ethernet cable to the WAN port 
of the iAN-02EX ATA 

 

connect the other end of the cable to your 
LAN (Hub/Router). 

 

 

 

At the end of the connections, the “PWR”, “WAN”, “ENET”, and “VoIP” LEDs will light: 

 

 

 Lighted shows that the ATA is powered by the wall  

socket. 

Lighted shows that the “physical” connection 

between your PC and the ATA is working correctly. 
Blinking  when data is being transmitted or received from 
or towards your PC.  

Lighted shows that the “physical” connection 

between the ATA and the ADSL modem is working 
correctly.  Blinking when data is being transmitted or 
received:  

Lighted shows that you are registered to the VoIP 

service of Eutelia and that you can make a calls. 

 Blinking when call is being received or 

transmitted.