Справочник Пользователя для Pelco PelcoNet NET300 Multimedia Transmission Via Network C2908M-B
10
C2908M-B (4/05)
Overview
DESCRIPTION
The PelcoNet NET300 transmission system is a network video server that encodes and decodes live video and control data transmitted and
received over Ethernet computer networks (either intranet or Internet) using the TCP/IP protocol.
received over Ethernet computer networks (either intranet or Internet) using the TCP/IP protocol.
The transmission system consists of two units: a transmitter (NET300T) and a receiver (NET300R)—however, only the transmitter is required to
use the system. If a receiver is used, video can be displayed on an NTSC or PAL monitor connected to the receiver. If a receiver is not used, video
can be displayed on a PC connected to the network through a web browser.
use the system. If a receiver is used, video can be displayed on an NTSC or PAL monitor connected to the receiver. If a receiver is not used, video
can be displayed on a PC connected to the network through a web browser.
Dual MPEG-4 video streams, each of which can be set up differently, is a special feature of the NET300. For example, one video stream might be
set to record at high resolution while the second might have monitoring at a lower resolution.
set to record at high resolution while the second might have monitoring at a lower resolution.
Transmitters and receivers are identified by IP addresses, just like any other equipment connected to a computer network.
There is a bidirectional serial interface for remote control of peripherals, such as PTZ cameras.
In appropriately configured networks, the multicast function permits simultaneous video transmission in real time to several receivers. For this to
work, the UDP and IGMP multicasting protocols must be implemented in the network.
work, the UDP and IGMP multicasting protocols must be implemented in the network.
SOFTWARE VERSION
This manual documents PelcoNet NET300 software version 3.0.
PACKAGE CONTENTS
The following are supplied:
•
Transmitter (NET300T) or receiver (NET300R)
•
Universal plug-in power pack with adapters for EU, UK, US, and AU
•
DB9 cable with pigtail
•
Quick installation guide
•
Software resource CD
Optional Compatible Products
NET300RK
The NET300RK rack mount kit provides rack mounting for the PelcoNet NET300. This kit supports the mounting of one to five
units per rack. Units can be mounted with either front or rear panel forward.
units per rack. Units can be mounted with either front or rear panel forward.
NOTE:
This manual refers to the PelcoNet NET300 transmission system unit when discussing features, functions, or specifications that
apply to both transmitter and receiver models. “Receiver,” as used in this manual, refers to a PelcoNet NET300 transmission system
receiver unless otherwise noted.
receiver unless otherwise noted.