Справочник Пользователя для Triax SR 322

• Press the 

 buttons on the Setup list to select Display  

 

and press the 

 button.

• Press the 

 button to select either Screen Type, Menu  

 

Transparency, SCART Output, SPDIF Output, RF Channel, RF Mode   
or TV Type and then press the 

 button to move to the right    

pop-up menu.

If you have a TV set with 4:3 picture format, select 4:3 TV and if you 
have a TV set With 16:9 picture format, select 16:9 TV.

If you have a TV set with the 4:3 picture format and the transmission is 
in 16:9, you can select Full, letterbox and Cinema.
If you have a TV set with the 16:9 picture format and the transmission 
is in 4:3, you can select Full, Pilar Box and Cinema.
Select the aspect ratio of TV which is connected to the receiver and 
then press the 

 button.

If your TV input supports SCART-RGB control, select SCART-RGB. 
Otherwise select SCART-CVBS. If your TV input supports S-VHS, select 
S-VHS.

Select Your Scart Screen Type.
You can select from 4:3 and 16:9 and then press the 

 button.

You can hear digital audio of the Dolby 5.1 channel using S/PDIF 
Output.

• If selecting Off, the digital audio will not be output.
• When selecting PCM, the unzipped digital audio is output through   

S/PDIF.

• When selecting Dolby Digital, if the current channel is a Dolby audio 

channel, the zipped Dolby stream is output through S/PDIF.

Select your TY Type. You can choose from Multi, NTSC, SECAM or PAL.
Press the 

 button to select from Multi, NTSC, SECAM or PAL 

and then press the 

 button. 

Select this alternative if you have to change the RF channel.
Select an UHF Channel you want with the 

 buttons. 

The RF Channel ranges from 21 to 69.

30