Справочник Пользователя для TMIO PS302SS00

From the Main Screen
•  Select 

My Oven drop down

•  Select 

•  Toggle the 

Use DHCP button to “on”

•  Select 

OK to save settings and return to the Main Screen, or Cancel 

to discard the settings and return to the Main Screen

From the Main Screen
•  Select 

My Oven drop down

•  Select 

•  Select 

Phone # and enter the 10 digit phone number you will most 

likely be calling from to access the oven.  Caller ID will recognize 
your phone number.

Note:  When calling from a different phone number, the Caller ID will 
not be recognized automatically, and you will be prompted to enter the 
phone number you entered here as part of the log in process.  To log 
in via the www.tmio.com web page,  enter this phone number.  (See 
Remote Control of Your Oven section below)
•  Select 

PIN # and enter a 4 digit numeric number only (changes to PIN 

can only be done at oven interface)

•  Toggle 

Remote Access button to “on”

•  Select 

OK to save settings and return to the Main Screen, or Cancel 

to discard the settings and return to the Main Screen

You must enable Remote Access to access your oven from a web browser or via a phone.  Enable Remote 
Access by entering a 10 digit phone number and 4 digit PIN number, and set the Remote Access to “on”.  
This phone number and PIN are required at log in.

Network Settings sets up your oven for Internet connectivity (Dial up is not supported).  Most home networks 
use DHCP to assign IP addresses.  If your home network uses fixed IP addresses, then set DHCP to “off” 
and enter the address manually.  Additional information is available in our Frequently Asked Questions (FAQ) 
section on our website www.tmio.com.

12