Справочник Пользователя для Oregon Scientific 3D WS912

Do not immerse in any liquid.
Never use abrasive cleaners, brushes, 
gasoline, kerosene, glass / furniture polish or  
paint thinner to clean. 

Unplug the unit and allow it to cool down before 
cleaning. Clean only with a soft, slightly damp 
sponge. Never allows water or any other liquids to 
come into contact with the unit.
$
$

Do not remove or unzip the unit cover to clean 
the internal parts. 
     

Do not attempt to repair the 3D Massage Seat 
with Heat. There are no user serviceable parts.

 

$

4

Place the unit in its box or in a safe, dry, cool place. 
Refrain from sharp edges or pointed objects that 
might cut or puncture the fabric surface. To avoid 
breakage, do not wrap the power cord around the 
unit. Do not hang the unit by the power cord or the 
cord of the remote control unit.

Press the TIMER button     to select 15 / 20 
minutes massage time. The screen will show 
countdown of the timer. 
         If no timer setting has been chosen the 
unit shuts off automatically after approximately 15 
minutes. 

For a brief demonstration of the features of the 3D 
Massage Seat, press and hold the SHIATSU   and 
ROLLING buttons      +      together for 3 seconds. 
    "  #             
features of the unit. The icons on the LCD 
  "  #             
corresponding function. Once completed, the unit 
turns off automatically.

 

L.E.D. light will turn off. 
        For your safety, soothing heat cannot be 
turned on if no massage program is in operation.

To initiate soothing heat, simply press the HEAT 
button and the corresponding amber L.E.D. light 
on the massage nodes will illuminate. Press the 
button again to deselect and the corresponding 

Press  INTENSITY button    to decrease or 
increase the rotation speed of the unit nodes. The 
display will show HI / LO           
return to the countdown of the timer. 
          Such option is not available to 3D rolling 
and rolling.

When entered the rolling mode, press WIDTH 
button          to adjust the width between the massage 
nodes. With each pressing, the massage nodes 
will move to the next available position (Narrow, 
Mid or Wide). 
         Width control does not work with Shiatsu 
and 3D rolling. 

After selected Shiatsu mode, press either UP / 
DOWN button    /    to target the Shiatsu action 
on one spot of you back. Adjust the mechanism 
position by holding either button until the next 
desired position has reached. The UP botton             
will move the mechanism upward and the DOWN 
button      will move it downward.

Shiatsu

3D Rolling

Heat

-

-

-

-

-

-

-

HI / LOW 15 mins

15 mins

Rolling

-

-

-

15 mins

Narrow, 

Mid 

or Wide

Roller 

width

Up / 

Down

Intensity

Default 

Timer

4.

$

$

Three massage zones to select with:

The LCD screen will display the information 
accordingly.

When Shiatsu mode begins, the unit operates 
            ;  "  
massage zone is selected, the unit will work
on the chosen zone with upward and 
downward motions. 
The unit shuts off automatically after 
approximately 15 or 20 minutes.

Guide to Massage Modes and options:

Fullback
Upper back
Lower back 

$
$
$

 width of the rollers (Narrow,  Mid or 
Wide).
Rolling can be activated concurrently with 
Heat program.

Press the 3D ROLLING button      on the 
remote control.
Rolling can be activated concurrently with 
Heat programs.

$

$