Справочник Пользователя для Oregon Scientific 900MHz Cordless Phone with Kitch Companion OS6976

Dial tone is OK, but can't dial out

• Make sure the tone/pulse setting is programmed correctly.

Handset does not ring

• Make sure the ringer switch on the handset is turned to ON.

• You may have too many extension phones on your line. Try unplugging some phones.

• See solutions for “No dial tone.”

Handset or Spacemaker® loses registration ID

• If the handset or Spacemaker® becomes unregistered,

PRESS AND HOLD BASE PAGE KEY

shows

in the display to prompt you to re-register the handset or the charge until

the wall base unit

restores the registration ID.

• If registration is not successful, unplug the wall base unit from the electrical outlet and re-plug

it after a few seconds to reset the unit.

You experience static, noise, or fading in and out

• Change channels

• Handset or Spacemaker® may be out of range of wall base unit. Move closer to wall base unit.

• Relocate the wall base unit.

• Charge the battery.

• Make sure wall base unit is not plugged into an outlet with another

household appliance.

Handset beeps

• Place handset in to the Spacemaker® charge cradle to reset. If that doesn’t work, charge battery

for 12 hours.

• See solutions for “No dial tone.”

• Replace battery.

Spacemaker® beeps

• Disconnect the power supply, wait for 2 minutes and re-connect it

to reset.

• See solutions for “No dial tone”.

Memory Dialing

• Did you program the memory location keys correctly?

• Did you follow proper dialing sequence?

• Make sure the tone/pulse setting is programmed correctly.

• Did you reprogram numbers into memory after power outage or battery replacement?

os6976-en1.p65

5/6/2005, 10:33 AM