Справочник Пользователя для ONKYO DR-645

Скачать
Страница из 36
19
En
Recording a Source
You can record a source onto a CD recorder or a cassette 
tape recorder connected to the COAXIAL DIGITAL 
AUDIO OUT
 jack or the LINE OUT jacks.
Dimmer
Muting
Super Bass boost
You can reinforce the bass sound to maintain rich, full 
bass at low volume.
Adjusting the bass and treble
You can change the bass and treble sound between “-5” to 
“+5”.
Stand-by power consumption
When charging the iPod, the power consumption may 
reach up to a maximum of 14 W.
Note
• Do not unplug the USB flash drive before playback is stopped.
Basic Operation
1
Select a source to be recorded by pressing 
DVD, 
iPod/USB, FM, or LINE.
2
Start recording.
• When the recording device is connected to the 
LINE 1 IN jack and the LINE OUT jack, you 
cannot select the LINE 1 Source for the recording 
source.
Press 
DIMMER to dim the display.
Press 
DIMMER again to cancel the dimmer 
function.
To mute the sound temporarily, press 
MUTING.
Press 
MUTING again to restore the sound.
• “MUTING” blinks on the display while muting is 
engaged.
• If you change the volume when the sound is muted, 
it will be unmuted.
Press 
S.BASS to get the effect.
Press 
S.BASS again to cancel the effect.
1
Press 
TONE repeatedly to select Bass or Treble.
2
Press 
VOL w to adjust the sound level.
Listening to a Disc
1
Press 
DVD to select “DVD Source”.
• When no disc is loaded in the disc tray, “NO 
DISC” is displayed.
2
Press 
0 on the unit to open the tray.
3
Place the disc on the disc tray (with the printed 
side up).
4
Press 
0 on the unit again to close the tray.
• Some discs may automatically start playback.
5
Press 
1/3 to start playback if playback has not 
started automatically.
If a menu is shown on screen (some DVD or video 
discs may show such a menu), see “On-screen 
Menu”.
Listening to an iPod
1
Press 
iPod/USB once or twice to select “iPod”.
2
Push your iPod firmly onto the unit’s dock 
connector.
Never insert the iPod into dock connector without 
the Universal Dock Adapter.
3
Press 
1/3 to start playback.
Listening to a USB Flash Drive
1
Press 
iPod/USB once or twice to select “USB 
Source”.
2
Plug your USB flash drive into the 
USB port.
It takes a few seconds for the unit to load the USB 
flash drive. Some files may automatically start 
playback.
• You can reverse steps 1 and 2.
3
Press 
1/3 to start playback if playback has not 
started automatically.