Справочник Пользователя для Northern Modular Telephone
• • • • 7 • • • •
The basics of using your telephone
On-hook dialing
On-hook dialing allows you to dial a number without lifting the handset.
To use On-hook dialing:
1.
Press a free DN key to obtain a line.
2.
Upon hearing dial tone, dial the desired number.
3.
Pick up the handset when you hear ringback/ ring tone or when the called party answers or begin
talking if using handsfree. If it is busy/engaged, press
talking if using handsfree. If it is busy/engaged, press
R
to release the line, or
¶
if
desired.
Handsfree
If your telephone is an M2616 model or an M2008HF model, you can use the built-in microphone and
speaker instead of the handset. At any time during a call, you can switch to the handset by picking it
up. You can also mute your microphone so that the other party cannot hear you speaking.
speaker instead of the handset. At any time during a call, you can switch to the handset by picking it
up. You can also mute your microphone so that the other party cannot hear you speaking.
To use Handsfree on a call:
1.
Press
©
or a DN key instead of picking up your handset.
2.
Press
R
to end your call.
To mute a handsfree call:
1.
Press
©
. The
º
º
º
º
flashes.
2.
Press
©
again and return to the two-way conversation.
To switch from the handset to Handsfree:
1.
Press
©
.
2.
Replace the handset.
PreDial
PreDial allows you to enter and preview a number, making corrections if required, before dialing the
number. (This applies to the M2008/M2008HF and the M2616 telephones with the Display Module
Option.)
number. (This applies to the M2008/M2008HF and the M2616 telephones with the Display Module
Option.)
To use PreDial:
1.
Without lifting the handset or pressing a DN key, enter the number.
2.
Preview the number.
3.
Use the volume key to backspace if you need to correct the number.
4.
Press a free DN key to dial the number.
5.
Lift the handset when the called party answers, or if using handsfree, begin talking.