Листовка для Xantech Mouse 283M



2

283M

Side View

Top View

Emitter

Adhesive Layer

Mouse Emitter Shield

MS-1 and 283M installed

over IR sensor window.

• An optional shield, available from Xantech as model MS-1, fits over the 283M and the sensor window

(Fig. 3) of the controlled component.  It prevents unwanted external IR signals from passing through or
leaking past it.

• Use the MS-1 when you want the equipment to respond only to the 283M, such as in zone controlled

systems.

• Install it according to the instructions that come with the MS-1.

• Simply insert the mono mini plug of the 283M emitter into the "EMITTERS" or "OUT" jacks on any of the

Xantech Connecting Blocks or Controllers.

  To do so will destroy the emitters!

• Fig. 4 illustrates a typical basic system using 283M emitters.

• The 283M visible mouse emitter will also indicate the presence of stray IR or RF interference by randomly

blinking when no IR control signal is being sent.  Reposition the IR receiver or the interfering source to
eliminate or reduce the random blinking. The more the random blinking is reduced, the better the system
will function.

Satellite Receiver

To 120 V AC

(unswitched)

Power Supply

 Emitter

 Emitter

AV Receiver

VCR

Hand Held

Remote

IR Receiver

 Blink-IR™

Mouse Emitter

Connecting Block

®

5-18-00