Справочник Пользователя для Smart Inventions HAWM-UX/UF

CHAPTER 2 – CABLING AN 885ix SYSTEM TO A HAWM-UX/UF

 

Connecting your SMART UX60 projector to the pen tray 
audio jack

The audio and power jacks are located beside each other on the back of the pen tray.

1. Connect the ends of the stereo Y cable to the VGA 1 and the VGA 2 inputs on 

your UF65 or UF65w projector.

2. Connect the other end of the stereo Y cable to the audio jack on the back of your 

interactive whiteboard’s pen tray.

Connecting the SMART UX60 projector to the SBA-L 
Projection Audio System

The HAWM-UX/UF is designed to accommodate mounting the SBA-L Projection 
Audio System directly to the interactive whiteboard. That way, when the speakers rise 
and descend with the HAWM-UX/UF’s and interactive whiteboard’s movement, there’s 
less risk of damage to the audio connection and power cables. Therefore, SMART 
recommends that you don’t mount the projection audio system (SBA-L) speakers to 
the wall.

Before connecting the audio system to the projector, you must install the speaker 
brackets, speakers and speaker cable clips according to the SBA-L Projection Audio 
System Installation Instructions (

). 

1. Retrieve the 3.5 mm jack to dual channel audio output (two RCA jacks) cable from 

the SBA-L packaging. This is the audio connection cable. Attach the 3.5 mm jack 
to the projector’s connection panel. 

Audio
jack

Power

jack