Справочник Пользователя для eMachines DUV1000

DUV1000 User’s Guide 

 

 

 

7  

After installation, DUV1000 is ready for configuration. You need to enter Internet Service Provider 
(ISP) and Calling Card information to make and receive Internet phone calls. However, it can 
make normal PSTN phone calls without any configuration. Refer to Appendix A to know how to 
enter alphanumeric and special characters required for user name and password.   
 

entry by pressing ‘#’ key. For example, to enter the password as ‘123’ you should press ‘123#’. 
 

Following Internet Service Provider (ISP) account information is required for dial-up Internet 
connection. Refer to your Internet Service Provider’s card for this information. 
 

¾

  Internet Access Telephone Number 

¾

  User Name 

¾

  Password 

 
To enter these parameters, follow the steps below. DUV1000 voice menu guides you through the 
configuration process. 

1. Enter 

‘

∗123∗#’ to enter the configuration menu. 

2.  Enter the configuration password. The default password is ‘12345’.  
3.  Enter ‘1’and then ‘1’again, to edit the ISP parameters. It plays “Please enter the ISP 

phone number and terminate by ‘#’ button”.  

4.  Enter the Internet access phone number and terminate by pressing ‘#’ button. During 

entry, it echoes the character pressed.  

5.  After the termination, it plays back the value, as “You entered xxxx, press ‘1’ to accept, ‘2’ 

to re-enter. Press ‘1’ to accept the entered parameter. If you want to re-enter the 
parameter, press ‘2’. 

6.  Follow the voice menu to enter ISP User Name and password. After ISP configuration, 

phone plays the main menu. 

7. Enter 

‘5’ to save the ISP information. 

Following VoIP (Internet Telephone) calling card information is required for Internet phone 
connection. The VoIP service provider will provide these parameters. Refer your calling card for 
these parameters. After entering the calling card parameters, your Internet phone number will be 
same as user ID.  
 

¾

  User ID 

¾

  Password or PIN 

 
To enter these parameters, follow the steps below and the voice menu from DUV1000. 

1. Enter 

‘

∗123∗#’ to enter the configuration menu. 

2.  Enter the configuration password. The default password is ‘12345’.  
3.  Enter ‘2’ and then’1’, to edit the VoIP calling card parameters. It plays “Please enter the 

calling card user ID and terminate by ‘#’ button”.  

4.  Enter the calling card User ID and terminate by pressing ‘#’ button. During entry, it 

echoes the character pressed.  

5.  After the termination, it plays back the value, as “You entered xxxx, press ‘1’ to accept, ‘2’ 

to re-enter. Press ‘1’ to accept the entered parameter. If you want to re-enter the 
parameter, press ‘2’. 

6.  Follow the voice menu to enter the calling card password.