Справочник Пользователя для Force10 Networks Force10 TeraScale E-Series E1200i

76

To install the flash memory card: 

To remove the flash memory card: 

New external flash cards must be formatted in the E1200i before use. 

Flash cards used on systems other than the E1200i as well as cards formatted on PCs must be reformatted 
in the E1200i flash slot before they can be used. Similar to formatting a new diskette, formatting erases all 
information stored on the flash card. 

To format the flash card: 

1.

Press the ejector button to ensure it is in the 
extended position. Hold the flash card vertically 
(with the manufacturer’s label on the left and the 
barcode on the right).

 

2.

Gently insert the flash card into the primary RPM 
flash slot until the card is flush with the front panel. 
Do not force the flash card into the slot.

3.

The In Use LED illuminates only during read or write 
operations.

1.

Gently depress the flash card in the slot. The card should partially pop out of the slot.

2.

Remove the card and place it in an antistatic bag.

1.

Insert the flash card into the flash slot on the primary RPM.

2.

In the EXEC CLI mode, enter 

 

3.

The formatted flash card is ready to use.