Справочник Пользователя для Citrix Systems Network Router NETSCALER 9.3
w
show snmp alarm PF-RL-PPS-THRESHOLD
Example
> set snmp alarm PF-RL-PPS-THRESHOLD -
> set snmp alarm PF-RL-PPS-THRESHOLD -
thresholdValue 70 -normalValue 50
Done
> show snmp alarm PF-RL-PPS-THRESHOLD
Alarm
Alarm Threshold Normal
Threshold Time State
Severity Logging
-----
---------------
---------------- ------------
------------- --------
1) PF-RL-PPS-THRESHOLD
70
50
N/A ENABLED
- ENABLED
Done
To modify or remove the threshold values by using the
NetScaler command line
w
To modify the threshold values, type the set snmp alarm PF-RL-PPS-THRESHOLD
command and the parameters to be changed, with their new values.
command and the parameters to be changed, with their new values.
w
To remove the threshold values, type the unset snmp alarm PF-RL-PPS-THRESHOLD
command, followed by the –thresholdValue parameter, but do not specify any value
for the parameter.
command, followed by the –thresholdValue parameter, but do not specify any value
for the parameter.
Note: The normal-threshold value is automatically unset when you unset the high-
threshold value.
threshold value.
Parameters for configuring an SNMP alarm for throughput
or PPS
thresholdValue
The high threshold value, which triggers EVENT ALERTSTARTED. Minimum value: 1.
normalValue
The normal threshold value, which triggers EVENT ALERTENDED.
state
The current state of the alarm. Possible values: ENABLED, DISABLED. Default: ENABLED.
severity
The severity level of the alarm. Possible values: Critical, Major, Minor, Warning,
Informational. Default: SNMP_SEV_UNKNOWN.
Informational. Default: SNMP_SEV_UNKNOWN.
Citrix NetScaler Administration Guide
61