Справочник Пользователя для Auto Page RF-225

 

3

Arming feature, which allows the security system to arm 30 seconds after 
the last door is closed. Operation is as follows.  

1.  Turn the ignition to the “OFF” position and exit the vehicle. 
2.  After all entrances are closed, the security system LED will flash fast 

for 30 seconds. If you reopen any door / hood / trunk, the security 
system LED will stop flashing. It will begin flashing again once all 
vehicle entrances are closed.  

3.  After 30-second timer has elapsed, the security system will 

automatically “ARM”. The siren or horn will chirp [1] time and the 
parking lights will flash [1] time. 

PASSIVE DOOR LOCKING: Programmable 
The vehicle doors will automatically lock after passive arming cycle has been 
completed.

ACTIVE UN-LOCKING   – UNLOCK & DISARM: (OPTIONAL) 

1. Press the 

 

 button on the transmitter.  

2. The siren or horn will chirp twice and parking lights will flash twice to 

indicate that the security system is now disarmed. The vehicle doors will 
unlock when interfaced with the security system. 

TAMPER DISARMING:  (OPTIONAL).  If the alarm is triggered; Upon 
disarming the system the siren or horn will chirp 4 times and parking lights 
will flash 3 times. This will indicate that the alarm has been triggered while 
armed.  
TWO STEP DOOR UNLOCK: (OPTIONAL) This feature will independently 
unlock the driver’s door only when disarming the security system. Pushing 

the 

 

 button on the transmitter a second time within 3 seconds will unlock 

the entire vehicle. Optional 
AUTOMATIC  RE-LOCKING or  RE-ARM: If this feature is selected, the 
security system will automatically re-arm itself 60 seconds after disarming 
with remote transmitter. Automatic rearm will cancel if any door is opened 
before the 60 seconds timer has elapsed.  

 

The Override function may be used if the remote transmitter is lost or 
inoperative.  
1. Enter the vehicle and  turn the ignition switch to 'ON’ position. (Alarm 

will sound.) 

2. Within 10 seconds push and release the valet switch 

 The alarm will stop sounding and enter the disarm mode. You can now 
start and operate the vehicle  normally. 

The valet switch allows you to temporarily bypass all alarm functions 
eliminating the need to hand your transmitter to parking attendants or 
garage mechanics. When the system is in valet mode, all alarm functions 
are bypassed, however, the remote panic feature and remote door locks 
will remain operational.  
Enter Valet Mode: 

1.  Turn the ignition to “ON” position. 
2.   Push and hold valet  switch for 2 seconds or until the LED turns on. 

The LED will remain on as long as the system is in 'valet mode'.  

  Exit Valet Mode: 
1.  Return to normal operation, turn ignition 'ON'.  
2.  Push and hold valet switch for 2 seconds; the LED will turn off 

indicating the system is exiting the valet mode.