Справочник Пользователя для C. Crane PR-D4VW

2) Immediately press and hold the Scan/Set button for

3 seconds and you will hear a beep. The ALARM 

and           or           will flash, 

depending on which type of alarm is being set.

3) Using the Up/Down Tuning Buttons, select the 

appropriate hour digit and AM or PM.

4) Press the Scan/Set Button again to select the minutes digits. 

The 

will flash.

5) Use the Up/Down Tuning Buttons to adjust the minutes to the 

appropriate time.

6) When finished press the Scan/Set Button. The          or

symbol will be displayed.

If the Radio Alarm has been chosen, when the alarm time 
is reached the radio will play the last station selected at 
the same volume level last set.

If there is no alarm symbol on the display, the alarm has 
not been activated.

SCAN

Follow steps 1-6 for both the Radio and Beep Tone
Alarms. This allows you to set two different activation
times and alarm types. This symbol (shown at right)
will be displayed if both alarms are activated.