Справочник Пользователя для ASUS P/I-P55T2P4
ASUS P/I-P55T2P4 User's Manual
7
III. INSTALLATION
III. INST
ALLA
TION
(Jumpers)
Jumper Settings
1. Onboard Multi-I/O Selection (JP1)
You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through BIOS (see CHIPSET FEATURES SETUP) or disable all
Multi-I/O items at once with the following jumper in order to use your own
Multi-I/O card.
lel, and IrDA) through BIOS (see CHIPSET FEATURES SETUP) or disable all
Multi-I/O items at once with the following jumper in order to use your own
Multi-I/O card.
Selections
JP1
Enable
[1-2] (Default)
Disable
[2-3]
1
Multi I/O Setting (Enable / Disable)
2
3
3
JP1
Enable (Default)
Disabled
1
2
3
2
3
JP1
2. Flash ROM Boot Block Programming (JP2)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position.
allow programming in the Enabled position.
Programming
JP2
Disabled
[1-2] (Default)
Enabled
[2-3]
1
JP2
Boot Block Programming (Disable / Enable)
JP2
2 3
1 2 3
Disabled (Default)
Enabled